Ain Technology (Shenzhen) Co., Ltd
Ain Technology (Shenzhen) Co., Ltd
Add to Cart
Dual - Tech outdoor pir sensor PIR motion PIR detector for security system XC-1XT
PIR motion PIR detector Introduction
PIR motion PIR detector Parameters
| Item | Specification | ||||||
| Model | XC-1XT | ||||||
| Detection Range | 40ftx56ft (12m×17m) | ||||||
| Supply Voltage | 9.5 ~ 16V DC | ||||||
| Current Draw | Max. 35mA at 12V DC | ||||||
| Detection Method | Passive Infrared + Microwave | ||||||
| Infrared Detection | Dual-Element | ||||||
| PIR Sensitivity Adjustment | 60%/80%/100%/120%, selectable | ||||||
| Infrared Pulse Count | 2 or 4, Selectable | ||||||
| Microwave Detection | MIC Module (10.525GHz) | ||||||
| Microwave Pulse Count | 2 Pulses | ||||||
| Warm-up Time | 50±15S | ||||||
| Alarm Output | N.C./N.O. 30V DC, 0.35A Max. | ||||||
| Alarm Period | 2±0.4S | ||||||
| Alarm Indicator | Red LED (On/Off Selectable) | ||||||
| PIR Detection Indicator | Green LED Flashes | ||||||
| Microwave Detection Indicator | Yellow LED Flashes | ||||||
| Alarm Memory Indicator | Red LED Monitor (On/Off Selectable ) | ||||||
| Tamper Switch | N.C. , Open when cover is removed. 30VDC, 0.5A Max. | ||||||
| Operating Environment | -26℃ ~ +50℃, Rh.95% Max. | ||||||
| Dimensions | 160mm × 70mm × 43.9mm | ||||||
| Weight | 180g | ||||||
How to Install XC-1XT
1. XC-1XT optimum installation height: 2.0m-2.2m
2. How to adjust bracket angle when installation is too high.
3. The detection distance will become short when angle is adjust too much. (even mounting height >2.2m)
4. Optimal way of detection: to let the object enter the detection area by the way of transverses as following picture.
5. For these objects in the direction of motion, you may encounter shorter detection ranges
6. LED light
Green: PIR is sensing the target.
Yellow: MW PIR is sensing the target.
RED: Send out the alarm signal(Both PIR & MW is sensing the target.
7. How to adjust MW range
Remove back cover and find the “MW RANGE ADJUSTMENT”.
Turn clockwise to Increased MW sensitivity.
Turn counterclockwise to reduce the MW sensitivity.
FAQ:
Q: 1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q: 2. What is the lead time?
A:Sample needs 1-3 days, mass production time needs 10-15 days for order less than 5000 pcs.
Q: 3. How do you ship the goods and how long does it take arrive?
A: for samples, We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive.
for cargos, you can choose sea or airline service by your needs.
Q: 4. How to proceed the order if I have logo to print?
A: Firstly, we will prepare artwork for visual confirmation, if the color and position are alright, we would make sampling first from silk print factory and take picture for your second confirmation before mass production.
About US
International leading alarm security system, door magnetic contacts, smart home security products, smart sanitary products