Ain Technology (Shenzhen) Co., Ltd
Ain Technology (Shenzhen) Co., Ltd
Add to Cart
This Perimeter Intrusion Detection Systems is a multi beams photoelectric sensor designed for a wide variety of outdoor and indoor residential, commercial and industrial applications. It provides ideal cost-effective solutions for perimeter protection of buildings, such as: two sides of the yard door, window, especially for inner balcony to substitute metal structure.
Description:
| Item | Specification | Remark | |||||||||
| Model | XA-030D | XA-060D | XA-080D | XA-100D | |||||||
| Detection Mode | Pulse Infrared | ||||||||||
| Range | 30m | 60m | 80m | 100m | Outdoor | ||||||
| Power Input | DC10 ~28V | Polar | |||||||||
| Consumption Current | 77mA Max. | 85mA Max. | Transmitter and Receiver at DC 12V | ||||||||
| Alignment Range | Vertical :±5degrees ,Horizontal :±90degrees | Transmitter and Receiver | |||||||||
| Interruption Period | 40msec/100msec/400msec/700msec | 4 stage by DIP switch | |||||||||
| Relay Output Action | Alarm | When beam is shaded(2 seconds Min) | |||||||||
Supply voltage drop alarm | When power supply voltage falls (2 seconds Min). | ||||||||||
| Relay Output | No voltage contact output Output Rating :DC30V,0.3A (Resistor Load ) Select the contact a or b through the switch | Output located on the receiver | |||||||||
| Alarm Action Indication | Alarm Low supply voltage alarm | Red LED is on when alarming, and red LED is off when guarding Red LED is off in the normal state, and red LED is on in the abnormal state | Located on the receiver can not display when power off on/off by DIP switch | ||||||||
| Voltage Level Optical Alignment Alignment LED | Insert the voltmeter's probe into the receiver monitor jacks , and adjust for the Max. voltage. Red LED Indicator ON, FLASH, and OFF is changed by received level. | Refer to the instruction to adjust. Located on the transmitter ON/OFF by the switch | |||||||||
| Tamper Output | Condition Rating | N.C.open when receiver' cover is removed. No-voltage contact output, DC 30V, 0.3A (resistive load) | Output from tamper terminal that located on the receiver. | ||||||||
| Power Indicator | Green LED ON when a transmitter is powered. | located on the transmitter ON/OFF by the switch. | |||||||||
| Operating Environment | Temperature: -25℃ ~ + 55℃; humidity: Rh.95% Max. | ||||||||||
| Dimensions | 234mm×77mm×83mm | Cover:Black ,PC resin Main Unit:Yellow,ABS resin | |||||||||
| Weight | Transmitter::520g,Receiver:550g | Including mounting plate | |||||||||
Features
About US
International leading alarm security system, door magnetic contacts, smart home security products, smart sanitary products